Minelab SE Pro Metal Detector w/Extras

JR's will include a Stainless Steel Digging tool, a Treasure Apron and a detector Carrybag,

 when you purchase this detector. Koss Headphones are included by Minelab

Maximum results, for serious detectorists.

Minelab's multiple frequency Full Band Spectrum (FBS) technology is the only technology in the world that provides the serious treasure hunter with both deep detection and deep precision discrimination, regardless of ground conditions and target type. 

Minelab’s FBS technology simultaneously transmits 28 multiple frequencies from 1.5kHz to 100kHz. The lower the frequency used by a detector, the deeper it can penetrate. At low frequencies however, the sensitivity to small targets is sometimes reduced. The higher the frequency, the higher the sensitivity to small targets, but higher frequencies will not penetrate the ground as deeply. The increased frequency range of the Explorer SE Pro means more sensitive and accurate target identification at greater depths. 

FBS technology also improves the detector's ability to cancel ground mineralisation. Ground balancing is automatic, so whatever the field conditions, the Explorer SE Pro maximises the depth, sensitivity and discrimination. 

Serious detectorists understand that every outing is a unique opportunity in time that needs to be enjoyed and maximised. Minelab's Explorer SE Pro detector will handle varying conditions with maximum results! 

Features:

28 Frequency Full Band Spectrum™ (FBS) technology. 

New lightweight, perfectly balanced waterproof ultra-light & ultra-tough 11" Double-D coil 

NiMH battery pack or 8 x AA Alkaline batteries for long battery life. 

3rd generation software with faster and more powerful microprocessor. 

Full function advanced programming. 

Unique dual coordinate target profiling with patented SmartfindTM. 

Full ferrous Iron Mask discrimination. 

Easy learning curve with Quickstart Mode. 

Intuitive user interface with large, easy to read target coordinates. 

Fine sensitivity, threshold and volume adjust controls.

SPECIFICATION

Product Explorer SE Pro

Application Coin, Relic, Jewellery & Beach

Technology FBS

Frequency/Transmission 1.5 - 100kHz

Coil (standard) 11" Double-D lightweight, waterproof.

Audio Output Internal speaker & 6.35mm (1/4") headphone jack.

Headphones Supplied Koss 100 ohm headphones.

Visual Display Large monochrome 71mm x 38mm (2.8" x 1.5") LCD with improved graphics and adjustable contrast.

Backlight Yes.

Memory Settings saved automatically while detecting and remain until changed or reset.

Depth Indication Depth indicator, updates in Pinpoint mode.

Detect Modes Smartfind(TM) & Iron Mask.

Discrimination Smartfind(TM) 2 dimensional Discrimination: Ferrous 31, Conductivity 31. 8 discrimination patterns (Coins, Fe Coins, Jewellery, Foil, Pull Tab, Crowncap, Screwcap & Nail) & 6 user slots.

Audio tone Constant & Multi-tone; customizable for conductivity or ferrous response.

Audio Type Long, Smooth & Pitch Hold.

Ground Balance Automatic ground compensation - advanced digital filtering.

Pinpoint Non-motion with modulated audio.

Sensitivity Adjust Semi-automatic & Manual (adjustable 1 to 32).

Tune / Noise Cancel Manual & Automatic (11 channels).

Threshold Finer adjsutment level from 0 to 40.

Target Volume Adjust Limit & Gain (1 to 10).

Battery 1600mAh NiMH or Alkaline batteries.

Low battery alert Audio alert.

Length 1100mm - 1358mm (43" - 55").

Weight 1.7kg (3.7lbs) (ex. battery).

Warranty 3 years control box & coil.